Browse by Manufacturer
Browse Categories
New Page 3

References:

Balance Tap Config Guide

PowerEdge Lipo Video's
PowerEdge 2600 TX Pack Video Review
-
PowerEdge 7S 5000 in EF Extra EXP -
Tareq Al Asaasi flies PowerEdge in Protos -
PowerEdge 6S 5000 30C T-Rex 600 Video
PowerEdge 3S 2200 30C in Sapac F-16
            

PowerBox Systems 6610
PowerBox Spark Switch
Your Price: $51.95

Product Options

Spark Switch Voltage:

Detailed Description

Technical Data

Operating voltage 4.0V - 9.0V
Current drain Power-on state 19mA
Current drain Standby 0.2μA
Maximum load current max. 2A
Output voltage 5.9V / 7.4V / 12.0V
Signal input PWM
Dimensions 56 x 19 x 16 mm
Weight 22g incl. Patchwire
 

Product description

The SparkSwitch is a reliable, high-performance ignition switch. The overall design of the SparkSwitch is deliberately simple, but omits no important functions. The ignition switch is immediately ready for use as supplied, and needs no setting up. The only requirement is to set up the switch channel at the RC system transmitter.

The SparkSwitch can be used to turn the ignition circuit on and off from the transmitter, and is suitable for use with power supplies consisting of NC, LiPo or LiFe cells. The output voltage is subject to linear stabilisation, and is regulated at 5.9 Volt (alternativ 7.4V and 12V): a value which is suitable for all types of ignition system. The separate plug-in ultra-bright 5 mm LED should be mounted in the area of the engine cowl, in order to indicate the switched state.

A particularly user-friendly feature is that the unit detects when the receiving system is switched off, and draws no current from the ignition battery thereafter. This means that there is no need for an additional switch between the battery and the SparkSwitch, and forgetting to switch off the ignition battery is no longer a problem.

As you would expect, the battery can also be recharged without being disconnected.

The power circuits for the receiver and the ignition system are isolated from each other by an opto-coupler, effectively preventing interference from reaching the receiver.

The set includes accessories such as two connecting leads and the LED and mount.

The SparkSwitch has also proved excellent in practice as an electronic switch for supplementary working systems such as lighting circuits.

Customer Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)
Shopping Cart
Your cart is empty.
Bantam e-Station charger

 

Highest Level of
Security Available
Click Above to view

Mailing List Sign Up

New Items

td>
PowerEdge PowerSwitch
PowerEdge 45C Lipo Batteries
XT60 Connectors & Charge Cable
UMX 2S 1-6 Battery Charge Cable
PowerEdge 3800 LiFe RX Battery
Servo Safety Clips
Paraboard Parallel Charging Board
PowerEdge 300 Mah battery for MCPX
PowerEdge 2600 60C Lipo's
PowerEdge LiFe RX Batteries
EC5 Charge Cable
8.00mm Bullet Set
JigsUp Soldering Station
PowerEdge 450 2S 30C battery
PowerEdge 450 3S 30C battery
10 AWG Wire
PowerEdge 2600 2S TX Battery